Month: November 2015

MSS SP 97 Weld Outlet SCH160 Full type

1. Technical drawing of MSS SP 97 weld outlet SCH160 full type.

Weld Outlet SCH160 Full Type
Technical drawing of Weld Outlet SCH160 Full Type

2. Dimension and weight specifications of MSS SP 97 full type weld outlet SCH160.

NPSA
mm
inch		B
mm
inch		C
mm
inch		D
mm
inch		T
mm
inch		Weight
kgs
lbs
1/2"20.00
1-1/8"		14.00
9/16"		11.50
7/16"		21.3
0.84“		4.78
0.188"		0.15
0.33
3/4"32.00
1-1/4"		19.00
3/4"		15.50
5/8"		26.7
1.05”		5.56
0.219"		0.32
0.71
1"38.00
1-1/2"		25.50
1"		21.00
13/16"		33.4
1.315”		6.35
0.250"		0.38
0.84
1-1/4"44.00
1-3/4"		33.50
1-5/16"		29.50
1-3/16"		42.2
1.66”		6.35
0.250"		0.60
1.32
1-1/2"51.00
2"		38.00
1-1/2"		34.00
1-5/16"		48.3
1.90”		7.14
0.281"		0.85
1.87
2"55.00
2-3/16"		43.00
1-11/16"		43.00
1-11/16"		60.3
2.375”		8.74
0.344"		1.00
2.21
2-1/2"62.00
2-7/16"		54.00
2-1/8"		54.00
2-1/8"		73.0
2.875”		9.53
0.375"		1.70
3.75
3"73.00
2-7/8"		73.00
2-7/8"		66.50
2-5/8"		88.9
3.50”		11.13
0.438"		2.95
6.50
4"84.00
3-5/16"		98.50
3-7/8"		87.00
3-7/16"		114.3
4.5”		13.49
0.531"		4.95
10.91
5"94.00
3-11/16"		122.00
4-13/16"		109.50
4-5/16"		141.3
5.563”		15.88
0.625"		6.81
14.99
6"105.00
4-1/8"		146.00
5-3/4"		132.00
5-3/16"		168.3
6.625“		18.26
0.719"		13.76
30.32

1. The bevel end of the full type WeldOLet SCH160 shall be furnished in accordance with ASME B16.25. “Full Type” indicates that the diameter of the branch outlet is the same that of the run pipe.
2. The wall thickness SCH160 shall be in accordance with ASME B36.10.
3. The full type WeldOlet SCH160 has the same dimensions as the full type WeldOlet XXS except for wall thickness (T value).

MSS SP 97 Weld Outlet SCH160 Reducing type

1. Technical drawing of MSS SP 97 reducing type weld outlet SCH160.

Weld Outlet SCH160 Reducing Type
Weld Outlet SCH160 Reducing Type according to MSS SP 97

2. Dimension and weight specifications of MSS SP 97 Reducing type weld outlet SCH160.

NPSA
mm
inch		B
mm
inch		D
mm
inch		T
mm
inch		Weight
kgs
lbs
1/2"20.00
1-1/8"		14.00
9/16"		21.3
0.84“		4.78
0.188"		0.15
0.33
3/4"32.00
1-1/4"		19.00
3/4"		26.7
1.05”		5.56
0.219"		0.32
0.71
1"38.00
1-1/2"		25.50
1"		33.4
1.315”		6.35
0.250"		0.38
0.84
1-1/4"44.00
1-3/4"		33.50
1-5/16"		42.2
1.66”		6.35
0.250"		0.60
1.32
1-1/2"51.00
2"		38.00
1-1/2"		48.3
1.90”		7.14
0.281"		0.85
1.87
2"55.00
2-3/16"		43.00
1-11/16"		60.3
2.375”		8.74
0.344"		1.00
2.21
2-1/2"62.00
2-7/16"		54.00
2-1/8"		73.0
2.875”		9.53
0.375"		1.70
3.75
3"73.00
2-7/8"		73.00
2-7/8"		88.9
3.50”		11.13
0.438"		2.95
6.50
4"84.00
3-5/16"		98.50
3-7/8"		114.3
4.5”		13.49
0.531"		4.95
10.91
5"94.00
3-11/16"		122.00
4-13/16"		141.3
5.563”		15.88
0.625"		6.81
14.99
6"105.00
4-1/8"		146.00
5-3/4"		168.3
6.625“		18.26
0.719"		13.76
30.32

Note:
1. The bevel end of the reducing type WeldOLet SCH160 shall be furnished in accordance with ASME B16.25. “Reducing Type” indicates that the diameter of the branch outlet is smaller than that of the run pipe.
2. The wall thickness SCH160 shall be in accordance with ASME B36.10.
3. The reducing type WeldOlet SCH160 has the same dimensions as the reducing type WeldOlet XXS except for wall thickness.

MSS SP 97 Weld Outlet XS Full Type

1. Technical drawing of MSS SP 97 weld outlet XS full type.

Weld Outlet XS Full Type
The technical drawing of weld outlet XS full type.

2. Dimension and weight specifications of MSS SP 97 weld outlet XS full type.

NPSA
mm
inch		B
mm
inch		C
mm
inch		D
mm
inch		T
mm
inch		Weight
kgs
lbs
1/2"19.0
3/4"		24.0
15/16“		14.0
9/16"		21.3
0.84“		3.73
0.147"		0.09
0.20
3/4"22.0
7/8"		30.0
1-3/16"		19.0
3/4"		26.7
1.05”		3.91
0.154"		0.14
0.31
1"27.0
1-1/8"		36.5
1-7/16"		24.0
15/16"		33.4
1.315”		2.17
0.179"		0.21
0.46
1-1/4"32.0
1-1/4"		44.5
1-3/4"		32.0
1-1/4"		42.2
1.66”		4.85
0.191"		0.40
0.88
1-1/2"33.5
1-5/16"		51.0
2"		38.0
1-1/2"		48.3
1.90”		5.08
0.200"		0.50
1.10
2"38.0
1-1/2"		65.0
2-9/16"		49.0
1-15/16"		60.3
2.375”		5.54
0.218"		0.79
1.74
2-1/2"41.5
1-5/8"		76.0
3"		59.0
2-5/16"		73.0
2.875”		7.01
0.276"		1.18
2.60
3"44.5
1-3/4"		93.5
3-11/16"		73.5
2-7/8"		88.9
3.50”		7.62
0.300"		1.85
4.08
3-1/2"47.5
1-7/8"		101.5
4"		85.0
3-5/16"		101.6
4”		8.08
0.318"		2.54
5.60
4"51.0
2"		120.5
4-3/4"		97.0
3-13/16"		114.3
4.5”		8.56
0.337"		2.90
6.39
5"57.0
2-1/4"		141.0
5-9/16"		122.0
4-13/16"		141.3
5.563”		9.53
0.375"		4.70
10.36
6"78.0
6-1/16"		170.0
6-11/16"		146.0
5-3/4"		168.3
6.625“		10.97
0.432"		10.40
22.93
8"87.5
3-7/16"		220.5
8-11/16"		193.5
7-5/8"		219.1
8.625”		12.7
0.500"		20.40
44.97
10"93.5
3-11/16"		265.0
10-7/16"		247.5
9-3/4"		273.0
10.75”		12.7
0.500"		24.80
54.67
12"100.0
3-15/16"		316.0
12-7/16"		298.5
11-3/4"		323.8
12.75”		12.7
0.500"		35.00
77.16
14"105.0
4-1/8"		351.0
13-13/16"		330.0
13"		355.6
14“		12.7
0.500"		37.70
83.11
16"113.0
4-7/16"		402.0
15-13/16"		381.0
15"		406.4
16”		12.7
0.500"		46.20
101.85
18"119.0
4-11/16"		452.0
17-13/16"		432.0
17"		457.0
18"		12.7
0.500"		58.90
129.85
20"127.0
5"		503.0
19-13/16"		482.5
19"		508.0
20"		12.7
0.500"		71.50
157.63
24"139.7
5-1/2"		605.0
23-13/16"		584.0
23"		610.0
24"		12.7
0.500"		141.00
310.85

Note:
1. The bevel end of the full type WeldOLet XS shall be furnished in accordance with ASME B16.25. “Full Type” indicates that the diameter of the branch outlet is the same as that of the run pipe.
2. The wall thickness XS (extra strong) shall be in accordance with ASME B36.10.
3. For sizes up to 8″(including), the dimensions are the same for XS and SCH80. For 10″ and over, the dimensions for SCH80 can be provided on customers’ request.

MSS SP 97 Weld Outlet XS Reducing Type

1. Technical drawing of MSS SP 97 weld outlet XS (WeldOlet), reducing type.

Weld Outlet XS, Reducing
Techncial drawing of Weld Outlet XS reducing type.

2. Dimension and weight specifications of MSS SP 97 weld outlet XS (WeldOLet), reducing type.

NPSA
mm
inch		B
mm
inch		D
mm
inch		T
mm
inch		Weight
kgs
lbs
1/8"16.0
5/8"		16.0
5/8"		10.3
0.405“		2.41
0.095"		0.04
0.09
1/4"16.0
5/8"		16.0
5/8"		13.7
0.540“		3.02
0.119"		0.04
0.09
3/8"19.0
3/4"		19.0
3/4"		17.1
0.675“		3.20
0.126"		0.07
0.15
1/2"19.0
3/4"		24.0
15/16“		21.3
0.84“		3.73
0.147"		0.09
0.20
3/4"22.0
7/8"		30.0
1-3/16"		26.7
1.05”		3.91
0.154"		0.14
0.31
1"27.0
1-1/8"		36.5
1-7/16"		33.4
1.315”		2.17
0.179"		0.21
0.46
1-1/4"32.0
1-1/4"		44.5
1-3/4"		42.2
1.66”		4.85
0.191"		0.40
0.88
1-1/2"33.5
1-5/16"		51.0
2"		48.3
1.90”		5.08
0.200"		0.50
1.10
2"38.0
1-1/2"		65.0
2-9/16"		60.3
2.375”		5.54
0.218"		0.79
1.74
2-1/2"41.5
1-5/8"		76.0
3"		73.0
2.875”		7.01
0.276"		1.18
2.60
3"44.5
1-3/4"		93.5
3-11/16"		88.9
3.50”		7.62
0.300"		1.85
4.08
3-1/2"47.5
1-7/8"		101.5
4"		101.6
4”		8.08
0.318"		2.54
5.60
4"51.0
2"		120.5
4-3/4"		114.3
4.5”		8.56
0.337"		2.90
6.39
5"57.0
2-1/4"		141.0
5-9/16"		141.3
5.563”		9.53
0.375"		4.70
10.36
6"78.0
6-1/16"		170.0
6-11/16"		168.3
6.625“		10.97
0.432"		10.40
22.93
8"87.5
3-7/16"		220.5
8-11/16"		219.1
8.625”		12.7
0.500"		20.40
44.97
10"93.5
3-11/16"		265.0
10-7/16"		273.0
10.75”		12.7
0.500"		24.80
54.67
12"100.0
3-15/16"		316.0
12-7/16"		323.8
12.75”		12.7
0.500"		35.00
77.16
14"105.0
4-1/8"		351.0
13-13/16"		355.6
14“		12.7
0.500"		37.70
83.11
16"113.0
4-7/16"		402.0
15-13/16"		406.4
16”		12.7
0.500"		46.20
101.85
18"119.0
4-11/16"		452.0
17-13/16"		457.0
18"		12.7
0.500"		58.90
129.85
20"127.0
5"		503.0
19-13/16"		508.0
20"		12.7
0.500"		71.50
157.63
24"139.7
5-1/2"		605.0
23-13/16"		610.0
24"		12.7
0.500"		141.00
310.85

Note:
1. The bevel end of reducing type weld outlet XS shall be furnished in accordance with ASME B16.25. “Reducing Type” indicates that the diameter of the branch outlet is smaller than that of the run pipe.
2. The wall thickness XS (extra strong) shall be in accordance with ASME B36.10.
3. For sizes up to 8″(including), the dimensions are the same for XS and SCH80. For 10″ and over, the dimensions for SCH80 can be provided on customers’ request.

MSS SP 97 Weld Outlet STD Full Type

1. Technical drawing of MSS SP 97 weld outlet STD full type (WeldOlet).

Weld Outlet STD Full Type
Weld Outlet STD Full Type

2. Dimension and weight specifications of MSS SP 97 full type WeldOlet STD.

NPSA
mm
inch		B
mm
inch		C
mm
inch		D
mm
inch		T
mm
inch		Weight
kgs
lbs
1/2"19.0
3/4"		24.0
15/16“		16.0
5/8"		21.3
0.84“		2.77
0.109“		0.07
0.15
3/4"22.0
7/8"		30.0
1-3/16"		20.5
13/16"		26.7
1.05”		2.87
0.113“		0.12
0.26
1"27.0
1-1/8"		36.5
1-7/16"		26.0
1-1/32"		33.4
1.315”		3.38
0.133“		0.18
0.40
1-1/4"32.0
1-1/4"		44.5
1-3/4"		35.0
1-3/8"		42.2
1.66”		3.56
0.14“		0.32
0.71
1-1/2"33.5
1-5/16"		51.0
2"		41.0
1-5/8"		48.3
1.90”		3.68
0.145“		0.36
0.79
2"38.0
1-1/2"		65.0
2-9/16"		52.5
2-1/16"		60.3
2.375”		3.91
0.154“		0.70
1.54
2-1/2"41.5
1-5/8"		76.0
3"		62.0
2-7/16"		73.0
2.875”		5.16
0.203“		1.10
2.43
3"44.5
1-3/4"		93.5
3-11/16"		78.0
3-1/16"		88.9
3.50”		5.49
0.216“		1.70
3.75
3-1/2"47.5
1-7/8"		101.5
4"		90.5
3-9/16"		101.6
4”		5.74
0.226“		2.25
4.96
4"51.0
2"		120.5
4-3/4"		101.5
4"		114.3
4.5”		6.02
0.237“		3.05
6.72
5"57.0
2-1/4"		141.0
5-9/16"		128.5
5-1/16"		141.3
5.563”		6.55
0.258”		4.85
10.69
6"60.5
2-3/8"		170.0
6-11/16"		154.0
6-1/16"		168.3
6.625“		7.11
0.28“		7.50
16.53
8"70.0
2-3/4"		220.5
8-11/16"		201.5
7-15/16"		219.1
8.625”		8.18
0.322“		12.70
28.00
10"78.0
3-1/16"		274.5
10-13/16"		254.0
10"		273.0
10.75”		9.27
0.365“		20.00
44.09
12"85.5
3-3/8"		325.5
12-13/16"		304.5
12"		323.8
12.75”		9.53
0.375“		29.40
64.82
14"89.0
3-1/2"		357.0
14-1/16"		336.5
13-1/4"		355.6
14“		9.53
0.375“		31.80
70.11
16"93.5
3-11/16"		408.0
16-1/16"		387.5
15-1/4"		406.4
16”		9.53
0.375“		41.70
91.93
18"101.5
4"		459.0
18-1/16"		438.0
17-1/4"		457.0
18"		9.53
0.375“		56.70
125.00
20"114.5
4-1/2"		510.0
20-1/16"		489.0
19-1/4"		508.0
20"		9.53
0.375“		79.30
174.82
24"124.0
4-7/8"		611.0
24-1/16"		590.5
23-1/4"		610.0
24"		9.53
0.375“		127.00
279.98

Note:
1. The bevel end of full type weld outlet STD shall be furnished in accordance with ASME B16.25. “Full Type” refers to same diameters of the run pipe and brand outlet pipe.
2. The wall thickness STD (standard weight) shall be in accordance with ASME B36.10.
3. For sizes up to 10″(including), the dimensions are the same for SCH40 and STD. For 12″ and over, the dimensions for SCH40 can be provided on customers’ request.

MSS SP 97 Weld Outlet STD Reducing Size

1. Technical drawing of MSS SP 97 Weld Outlet STD (WeldOlet) Reducing Size.

WeldOlet STD Reducing Type
WeldOlet STD Reducing Type

2. Dimension and Weight Specification of MSS SP 97 Weld Outlet STD (WeldOlet) Reducing Size.

NPSA
mm
inch		B
mm
inch		D
mm
inch		T
mm
inch		Weight
kgs
lbs
1/8"16.0
5/8"		16.0
5/8"		10.3
0.405“		1.73
0.068”		0.04
0.09
1/4"16.0
5/8"		16.0
5/8"		13.7
0.540“		2.24
0.088”		0.07
0.15
3/8"19.0
3/4"		19.0
3/4"		17.1
0.675“		2.31
0.091”		0.07
0.15
1/2"19.0
3/4"		24.0
15/16“		21.3
0.84“		2.77
0.109“		0.08
0.18
3/4"22.0
7/8"		30.0
1-3/16"		26.7
1.05”		2.87
0.113“		0.12
0.26
1"27.0
1-1/8"		36.5
1-7/16"		33.4
1.315”		3.38
0.133“		0.22
0.49
1-1/4"32.0
1-1/4"		44.5
1-3/4"		42.2
1.66”		3.56
0.14“		0.36
0.79
1-1/2"33.5
1-5/16"		51.0
2"		48.3
1.90”		3.68
0.145“		0.45
0.99
2"38.0
1-1/2"		65.0
2-9/16"		60.3
2.375”		3.91
0.154“		0.80
1.76
2-1/2"41.5
1-5/8"		76.0
3"		73.0
2.875”		5.16
0.203“		1.15
2.54
3"44.5
1-3/4"		93.5
3-11/16"		88.9
3.50”		5.49
0.216“		1.80
3.97
3-1/2"47.5
1-7/8"		101.5
4"		101.6
4”		5.74
0.226“		2.50
5.51
4"51.0
2"		120.5
4-3/4"		114.3
4.5”		6.02
0.237“		2.90
6.39
5"57.0
2-1/4"		141.0
5-9/16"		141.3
5.563”		6.55
0.258”		4.60
10.14
6"60.5
2-3/8"		170.0
6-11/16"		168.3
6.625“		7.11
0.28“		7.00
15.43
8"70.0
2-3/4"		220.5
8-11/16"		219.1
8.625”		8.18
0.322“		12.00
26.46
10"78.0
3-1/16"		274.5
10-13/16"		273.0
10.75”		9.27
0.365“		19.50
42.99
12"85.5
3-3/8"		325.5
12-13/16"		323.8
12.75”		9.53
0.375“		26.70
58.86
14"89.0
3-1/2"		357.0
14-1/16"		355.6
14“		9.53
0.375“		29.90
65.92
16"93.5
3-11/16"		408.0
16-1/16"		406.4
16”		9.53
0.375“		34.00
74.96
18"101.5
4"		459.0
18-1/16"		457.0
18"		9.53
0.375“		44.00
97.00
20"114.5
4-1/2"		510.0
20-1/16"		508.0
20"		9.53
0.375“		53.50
117.95
24"124.0
4-7/8"		611.0
24-1/16"		610.0
24"		9.53
0.375“		99.70
219.80

Note:
1. The bevel end of weld outlet std reducing type shall be furnished in accordance with ASME B16.25.
2. The wall thickness STD (standard weight) shall be in accordance with ASME B36.10.
3. For sizes up to 10″(including), the dimensions are the same for SCH40 and STD. For 12″ and over, the dimensions for SCH40 can be provided on customers’ request.

Company Introduction

HBMetals in Piping Industry
Hebei Metals Industrial Limited: A Piping Industry Supplier.

Hebei Metals Industrial Limited (HBMetals) has been engaged in the piping industry as a professional manufacturer and supplier of flanges, fittings, valves, pressure vessels, fasteners and pipes since the inception. We provide integrated solutions to whole-package procurement covering miscellaneous ferrous and non-ferrous piping components. The products are widely used in oil & gas project, subsea or offshore platform piping, chemical & pharmaceutical pipeline, power plant, sewage treatment, water supply piping, heat exchange application, pulp and paper production.

Address: No.176 Zhonghua South St., Shijiazhuang, Hebei Province, China.
Tel: +86-311-89642206   Fax: +86-311-67906676
Company website: www.hbmetals.com
Email: info@metalsflange.com
info@hbmetals.com