1. Technical drawing of MSS SP 97 reducing type weld outlet SCH160.
2. Dimension and weight specifications of MSS SP 97 Reducing type weld outlet SCH160.
| NPS | A mm inch | B mm inch | D mm inch | T mm inch | Weight kgs lbs |
|---|---|---|---|---|---|
| 1/2" | 20.00 1-1/8" | 14.00 9/16" | 21.3 0.84“ | 4.78 0.188" | 0.15 0.33 |
| 3/4" | 32.00 1-1/4" | 19.00 3/4" | 26.7 1.05” | 5.56 0.219" | 0.32 0.71 |
| 1" | 38.00 1-1/2" | 25.50 1" | 33.4 1.315” | 6.35 0.250" | 0.38 0.84 |
| 1-1/4" | 44.00 1-3/4" | 33.50 1-5/16" | 42.2 1.66” | 6.35 0.250" | 0.60 1.32 |
| 1-1/2" | 51.00 2" | 38.00 1-1/2" | 48.3 1.90” | 7.14 0.281" | 0.85 1.87 |
| 2" | 55.00 2-3/16" | 43.00 1-11/16" | 60.3 2.375” | 8.74 0.344" | 1.00 2.21 |
| 2-1/2" | 62.00 2-7/16" | 54.00 2-1/8" | 73.0 2.875” | 9.53 0.375" | 1.70 3.75 |
| 3" | 73.00 2-7/8" | 73.00 2-7/8" | 88.9 3.50” | 11.13 0.438" | 2.95 6.50 |
| 4" | 84.00 3-5/16" | 98.50 3-7/8" | 114.3 4.5” | 13.49 0.531" | 4.95 10.91 |
| 5" | 94.00 3-11/16" | 122.00 4-13/16" | 141.3 5.563” | 15.88 0.625" | 6.81 14.99 |
| 6" | 105.00 4-1/8" | 146.00 5-3/4" | 168.3 6.625“ | 18.26 0.719" | 13.76 30.32 |
Note:
1. The bevel end of the reducing type WeldOLet SCH160 shall be furnished in accordance with ASME B16.25. “Reducing Type” indicates that the diameter of the branch outlet is smaller than that of the run pipe.
2. The wall thickness SCH160 shall be in accordance with ASME B36.10.
3. The reducing type WeldOlet SCH160 has the same dimensions as the reducing type WeldOlet XXS except for wall thickness.