1. Technical drawing of MSS SP 97 reducing type weld outlets XXS.
2. Dimension and weight specifications of MSS SP 97 weld outlets XXS reducing type.
| NPS | A mm inch | B mm inch | D mm inch | T mm inch | Weight kgs lbs |
|---|---|---|---|---|---|
| 1/2" | 20.00 1-1/8" | 14.00 9/16" | 21.3 0.84“ | 7.47 0.294" | 0.16 035 |
| 3/4" | 32.00 1-1/4" | 19.00 3/4" | 26.7 1.05” | 7.82 0.308" | 0.34 0.75 |
| 1" | 38.00 1-1/2" | 25.50 1" | 33.4 1.315” | 9.09 0.358" | 0.39 0.86 |
| 1-1/4" | 44.00 1-3/4" | 33.50 1-5/16" | 42.2 1.66” | 9.70 0.382" | 0.63 1.39 |
| 1-1/2" | 51.00 2" | 38.00 1-1/2" | 48.3 1.90” | 10.15 0.400" | 0.89 1.96 |
| 2" | 55.00 2-3/16" | 43.00 1-11/16" | 60.3 2.375” | 11.07 0.436" | 1.05 2.31 |
| 2-1/2" | 62.00 2-7/16" | 54.00 2-1/8" | 73.0 2.875” | 14.02 0.552" | 1.79 3.95 |
| 3" | 73.00 2-7/8" | 73.00 2-7/8" | 88.9 3.50” | 15.24 0.600" | 3.10 6.83 |
| 4" | 84.00 3-5/16" | 98.50 3-7/8" | 114.3 4.5” | 17.12 0.674" | 5.20 11.46 |
| 5" | 94.00 3-11/16" | 122.00 4-13/16" | 141.3 5.563” | 19.05 0.750" | 7.15 15.76 |
| 6" | 105.00 4-1/8" | 146.00 5-3/4" | 168.3 6.625“ | 21.95 0.864" | 14.45 31.86 |
Note:
1. The bevel end of the weld outlet XXS reducing type shall be furnished in accordance with ASME B16.25. “Reducing Type” indicates that the diameter of the branch outlet is smaller than that of the run pipe.
2. The wall thickness XXS(Double Extra Strong) shall be in accordance with ASME B36.10.
3. The reducing type weld outlet XXS has the same dimensions as the reducing type WeldOlet SCH160 except for wall thickness.